welcome,guest
Negotiable
The date of payment from buyers deliver within days
Shandong
Long-term effective
2020-05-15 16:48
472
Company Profile
By certification [File Integrity]
Contact: haosai(Mr.)
Email: 
Telephone: 
Phone: 
Area: Shandong
Address: Shandong
Website: http://www.haosailmachinery.com/ http://haosai.wmhz315.com/
Petrol or gasoline engine plate compactor can compact the granular soil in the narrow site, and it is especially good at compacting and leveling the sand, sand, soil and asphalt surfaces, and the vapor oil tamping tools on the concrete surface, especially for the backfilling soil of the projects such as the compaction of the curbstone, the surrounding of the concrete structure, the drainage ditch of the sidewalk, the sewage treatment, etc.
its working principle is that the gasoline engine vibrates by centrifugal clutch and eccentric driven by belt. The base plate and eccentric are fixed together and vibrate by eccentric block.
Our petrol/gasoline engine plate compactor has the following features:
1. Use brand petrol/gasoline engine to ensure quality and superior performance
2. Adopt independent suspension type strong shock absorption mechanism to reduce the impact on the engine and improve the comfort of operators;
3. Forward and backward mechanical control, light and flexible
4.Reasonable design, stable operation, no dead angle and high efficiency
Technical Specification
Engine type |
Honda Petrol 5.5HP |
Frequency |
4200bpm |
Centrifugal force |
15kN |
Compaction depth |
300mm |
Travel speed |
38cm/s |
Plate size |
550x440mm |
Walking mode |
Forward |
Packing size |
700x470x690mm / 1Pcs； |
N.W/G.W |
88kg/91kg |
Engine type |
Loncin Petrol 6.5HP |
Frequency |
4200bpm |
Centrifugal force |
15kN |
Compaction depth |
300mm |
Travel speed |
38cm/s |
Plate size |
550x440mm |
Walking mode |
Forward |
Packing size |
700x470x690mm / 1Pcs； |
N.W/G.W |
88kg/91kg |
Precautions for small petrol plate compactor:
1. The gasoline tank must be clean and free of sand, sundries, water and other oil products.
2. The engine oil shall not be deteriorated, such as water, aging of engine oil for a long time, etc.
3. . when starting the engine to pull the starting cable, do not use too much force. As long as you feel the resistance during the pulling, and then pull hard at this position, it will start; then gently return the starting cable handle. In winter, the choke can be started by half closing, but it must be opened after starting.
4. Engine throttle pull rod, pull 80% in the main direction of throttle, do not fully open for a long time with high working temperature.
5. Do not vibrate in place on the hard ground and the working face that has been vibrated. Hard to hard will damage the equipment.
6. Water shall be sprinkled when tamping the lime soil working face, and the surface shall not be adhered to tamping
7. When working on cement or stabilized layer, pay attention to cleaning the machine after use.
http://www.haosailmachinery.com/
